BMW hood emblem, roundel, replacement:

Like every plastic car part exposed to the elements, over time it will crack, fade, weather and or fall apart.   The BMW hood emblem is no exception.  The most obvious sign of aging is the colors will lose vibrancy from the UV sun rays.  Luckily, a new BMW hood emblem is reasonably cheap for an OEM replacement. The total installation process takes 10-15 minutes.

The standard hood emblem size is 82mm in diameter, however your model may vary. Please make sure you order the correct size, you can check your car's original part number through

RealOEM.com

.  Worst case you can just remove the old emblem and get the original part number off the back.

We highly recommend replacing the emblem with an original OEM BMW part.  The quality is far superior to any cheap knock off emblem you can purchase on eBay.  Although the cheaper price of the fake emblem may enticing, it will age in the elements even quicker and need replacement quicker. With this in mind, save yourself the time upfront and do it right, get an original BMW hood emblem.

What OEM parts are needed?

✔ Quantity (1) 51148132375 (82mm) BMW hood emblem (verify part number as it may vary)
✔ Quantity (2) 51141807495 mounting grommet

What is the cost of the BMW hood emblem?

About $41 for the emblem and $1 for two grommets.

What tools are needed?

➊ Plastic pry tool
➋ Thin flat head screw driver
➌ Masking tape
➍ Needle nose pliers

How much time is needed?

About 10 - 15 minutes.

What is the process?

It is optional to tape the surrounding hood area of the emblem to protect the paint during the removal process.  Another protective option is to use a cloth under the pry tool eliminate the possibility of scratches.  Finding the right pry tool is critical to making the removal process easier.  The tip needs to be very thin to get under the emblem.  If you have a flat head screw driver thin enough, we recommend taping the tip with masking tape to ensure you do not scratch your paint. See the pictures below for further clarification.

Start by prying up the old emblem, work your way around the emblem until it starts to lift up evenly.  Once it is lifted up high enough for you to pick up with your fingers,just grab and pull.

The underside has two mounting tabs which are inserted into plastic grommets.  These two grommets should be replaced along with the emblem. The grommets dry out and crack, which will make the emblem loose. A loose hood emblem has the possibility to allow the emblem to fly off while driving.

To remove the plastic grommets take a needle nose pliers and pull them out.  With the hood emblem and both grommets removed now is a good time to clean the hood.  It is likely dirt, sand and or salt was trapped under the old emblem from typical driving conditions.

Once the hood is cleaned, begin to install the new grommets by pushing them in place.  Now, take the new BMW hood emblem and align the tabs down on the new grommets. It should fit snuggly with no gaps between the emblem edges and the hood.  Installation is now complete.

Where can I learn more BMW tips?

Learn more BMW pro tips by clicking HERE

BMW M Wheel Emblem sticker replacement:

Most BMW models since the 1990s equipped with the sport package or a full M car has a set of wheels with the iconic M motorsport badge.  This badge measures 10mm in height and 18 mm in width.  On many high mileage vehicles the badge becomes faded, scratched or is completely missing.  An easy way to bring your wheel back to original condition is by replacing the emblem.  The process of replacement is simple considering it is just a sticker.

If your BMW wheel M stripe badge is still in place but worn, just pick at it with your fingers and peel it off.  Once removed, used goo gone or rubbing alcohol to clean off any residual adhesive.  Make sure the surface is completely clean of any oils or residue before applying the new emblem.

Apply the new BMW Wheel M emblem by pealing off the backing.  Make sure to not touch the sticky part with your fingers, this will transfer oil onto the back.  If any oil or dirt gets on the back, the emblem will not fully stick to the steering wheel.  Make sure to install the BMW Wheel M emblem in the correct direction with the top of the M closest to center of the wheel.

What is the OEM BMW part number?

36112228660

What models will it fit?

Any Motorsport wheel with the recessed rectangle which accepts the M emblem. The size is standard for all old and new BMW models.

Where to buy the emblem:

You can buy the part in our store via the link HERE

✔ Check out our BMW wheel style guide! Click HERE

BMW Stick on Center Cap Emblem Replacement:

The iconic BMW roundel featuring the blue and white colors of the Bavarian flag is undeniably the most recognizable feature of any BMW.  Over time, the center caps can fade from UV, fly off from the breakdown of adhesive or corrode from salt.  Keep your wheels fresh by replacing worn BMW center caps.

There are two main styles of BMW center caps.  The older style has the stick on adhesive emblems.  These come in numerous sizes and fit numerous wheel styles on most all BWM models from the 1980s through 2000s.  Modern day BMW wheels have the snap in center caps, which we will cover in a later post.  This post focuses on the older, stick on style.

Before ordering a new set, make sure to measure your old emblem.  They came in a range of sizes depending on the size and age of the wheel.  The common diameter sizes are 58mm, 64.5mm & 70mm.

To remove an old emblem, simply pry up on it until it peels off.  Depending on how stuck it is, you may be able to use your finger or you may need a pry tool.  Careful not to scratch the center cap in the process.  Once the emblem is removed, discard the old center cap.  If there is any adhesive remaining on the wheel, use goo-gone or rubbing alcohol to ensure the cap is entirely clean from oils, adhesives or particles.

Apply the new stick on BWM emblem by removing the adhesive backing and centering it over the recessed wheel cap.  Make sure to only grab it by the edges.  Touching the sticky underside will cause oils from your fingers to transfer to the adhesive.  This will weaken the holding power of the adhesive.

Where to buy?

The BMW stick on center cap emblems can be ordered through your local BMW dealership or any online parts distributor. Simply search the BMW part numbers below.

What is the OEM BMW part number

58mm diameter: 36131181081
64.5mm diameter: 36131181080
70mm diameter: 36136758569

What models will it fit?

Any model BMW with appropriately sized adhesive style center caps.

How much does it cost?

Prices are around $8 - $10 each.

BMW MTech steering wheel badge / emblem replacement:

One of the most recognizable features of the Mtech 1 steering wheel is the iconic BMW Motorsport colored badge on the middle spoke. This badge or emblem is stuck on the wheel with adhesive. Over time this badge can fade, scratch or completely fall off. Luckily, BMW still makes the original badge and can be ordered online or at the dealer for around $20 - $25. Replacing this badge with a new factory replacement will bring back vibrancy to your Mtech 1 sport steering wheel.

If your BMW MTech steering wheel badge is still in place but worn, just pick at it with your fingers and peel it off. Once removed, used goo gone or rubbing alcohol to clean off any residual adhesive. Make sure the surface is completely clean of any oils or residue before applying the new emblem.

Apply the new BMW M stripe badge by pealing off the backing. Make sure to not touch the sticky part with your fingers, this will transfer oil onto the back. If any oil or dirt gets on the back, the emblem will not fully stick to the steering wheel. Make sure to install the BMW M stripe emblem in the correct direction with the Blue Stripe toward the left side of the wheel.

To remove / replace the steering wheel center roundel badge / emblem, make sure to see our post on this process HERE.

Where can I buy the BMW MTech steering wheel badge?

We sell them directly from our store HERE

What is the OEM BMW part number?

The OEM BMW part number is: 32331155957

What models will it fit?

Any Mtech 1 steering wheel. These steering wheels are commonly found on the BMW E30 and E28 models.

How much does it cost?

Approxiately $28.99, prices vary due to market demand.

BMW M badge replacement, steering wheel:

BMW Mtech 2 steering wheels have an M badge located on the middle spoke.  Over time this badge can crack, fade, scratch or just fall out.  Luckily, BMW still makes the original badge and can be ordered online or at the dealer for around $20.  Replacing this badge with a new factory replacement will bring back some vibrancy to your sport steering wheel.

The badge is pressed in place by two posts protruding from the rear of the badge.  If your worn badge is still existing, take a non metallic pry tool or a metallic screw driver with the end taped and pry off the old badge.  Installation of the new badge is done by simply pressing the new badge in place to where the posts are inserted in the existing post holes.

To remove the steering wheel center roundel badge / emblem, make sure to see our post on this process HERE.

Where to buy?

The sport steering wheel M emblem can be ordered through your local BMW dealership or any online parts distributor. Simply "GOOGLE" the part number to find a local vendor.

What is the OEM BMW part number?

OEM BMW part number: 32332226479

What models will it fit?

This emblem fits any E30, E36, E34, E32, E39, E39 and E81 model airbag steering wheels equipped with the M emblem.  The listed BMW models are the OEM wheels that were available with this emblem from the factory.  Many of the listed models have interchangeable wheels, such as E30 and E28.  It is likely your model may not be listed above but still have a wheel with this style emblem.

To check if your wheel has this emblem, remove the existing emblem and verify the recessed area has two holes which accept the emblem posts.  If the holes are existing, this badge will fit your steering wheel.

How much does it cost?

Prices hover around $20.

BMW steering wheel emblem / badge replacement:

BMW steering wheel emblems on non airbag 80s and 90s steering wheels tend to show their age through cracking of the plastic, fading of the paint or scratching of the surface.  Perhaps your emblem is missing altogether.  Luckily, BMW still manufactures these parts and can be purchased new today to bring life back to your interior.

BMW steering wheel emblem replacement:

The removal process is one of the easiest procedures to perform.  Simply grab a non metallic pry tool such as one for removing interior trim or take a flat head screwdriver and wrap the end in tape.  The purpose of the non metallic tool is to not scuff your rubber steering wheel.

Press down on the edge of the badge and slide the pry tool under the emblem and pry it up.  The emblem will pop out of place quite easily.  Remove the emblem with the replacement part by centering the emblem on the wheel and pressing it in place.

To remove the entire steering wheel, make sure to see our post on this process HERE.

Where to buy?

The steering wheel emblem can be ordered through your local BMW dealership or any online parts distributor such as FCPeuro.com or ECStuning.com

What is the OEM BMW part number?

32331117279

What models will it fit?

This emblem fits any BMW E9, E12, E21, E23, E24, E28, E30, E31, E32 and E34 model non airbag steering wheels equipped with the removable badge.

How much does it cost?

Prices range from $15 - $22.

The late model BMW key fob's feature a nice colored roundel or emblem like the hood of your car.  If you use your BMW has a daily driver hitting that emblem for the lock button is a routine task throughout the day.  The more the button is pressed, the more yellow it becomes and eventually the stickiness will wear off and the emblem will completely remove itself from the key fob.

Luckily the simple solution is to just replace the emblem, you do not have to replace the entire key fob housing.  These OEM BMW key fob emblems are reasonably priced online for around $7 and will add vibrancy back to your BMW key.

Where to buy the emblem:

You can buy the part in our store via the link HERE

What OEM BMW part number emblem is for my key fob?

E12 / E21 / E23 / E24 / E28 / E3 / E30 / E31 / E52 / E53 / E34 / E36/ E46 / E38 / E39 / X5: 66122155753

The above emblem part number is 11mm in diameter.  If you are unsure if it will fit your key, simply measure it.

E60 / E61 / E63 / E64 / E82 / E88 / E90 / E91 / E92 / E93: 66122155754

How to remove old BMW key fob emblem:

If your key fob emblem isn't already missing, the removal process is incredibly simple.  Just pick at the edges with your finger nail until it peels off.  The emblem is only held on with a sticker like adhesive.  It is not permanently fastened down.

Once the emblem is removed you want to make sure the surface is perfectly clean.  We recommend using Goo-Gone to get the bulk sticky residue off and then go back with some rubbing alcohol to ensure no grease is left behind.  Use a lightly wet cotton swab.  MAKE SURE TO SPRAY THE WET THE COTTON SWAB LIGHTLY.  Do not spray the key fob directly with Goo-Gone or rubbing alcohol.  Hold the cotton swab aware from the key fob while applying the degreaser, this will ensure no liquid gets inside and ruins the electrical components.  Having a nice clean surface will ensure the new emblem sticks on properly and will last a long time.

How to apply the new BMW key fob emblem:

Now that you have a perfectly clean surface, peal off the new emblem from the paper backing.  Make sure not to touch the sticky side with your fingers.  The oil from your fingers will transfer to the backing and it will prevent a proper application.

A good technique is to take an exacto knife and apply the emblem to the end and then slowly lower it down on the key fob making sure it is centered.  Press down firmly and hold for a few seconds to make sure the new emblem is getting good contact.