BMW hood emblem, roundel, replacement:

Like every plastic car part exposed to the elements, over time it will crack, fade, weather and or fall apart.   The BMW hood emblem is no exception.  The most obvious sign of aging is the colors will lose vibrancy from the UV sun rays.  Luckily, a new BMW hood emblem is reasonably cheap for an OEM replacement. The total installation process takes 10-15 minutes.

The standard hood emblem size is 82mm in diameter, however your model may vary. Please make sure you order the correct size, you can check your car's original part number through

RealOEM.com

.  Worst case you can just remove the old emblem and get the original part number off the back.

We highly recommend replacing the emblem with an original OEM BMW part.  The quality is far superior to any cheap knock off emblem you can purchase on eBay.  Although the cheaper price of the fake emblem may enticing, it will age in the elements even quicker and need replacement quicker. With this in mind, save yourself the time upfront and do it right, get an original BMW hood emblem.

What OEM parts are needed?

✔ Quantity (1) 51148132375 (82mm) BMW hood emblem (verify part number as it may vary)
✔ Quantity (2) 51141807495 mounting grommet

What is the cost of the BMW hood emblem?

About $41 for the emblem and $1 for two grommets.

What tools are needed?

➊ Plastic pry tool
➋ Thin flat head screw driver
➌ Masking tape
➍ Needle nose pliers

How much time is needed?

About 10 - 15 minutes.

What is the process?

It is optional to tape the surrounding hood area of the emblem to protect the paint during the removal process.  Another protective option is to use a cloth under the pry tool eliminate the possibility of scratches.  Finding the right pry tool is critical to making the removal process easier.  The tip needs to be very thin to get under the emblem.  If you have a flat head screw driver thin enough, we recommend taping the tip with masking tape to ensure you do not scratch your paint. See the pictures below for further clarification.

Start by prying up the old emblem, work your way around the emblem until it starts to lift up evenly.  Once it is lifted up high enough for you to pick up with your fingers,just grab and pull.

The underside has two mounting tabs which are inserted into plastic grommets.  These two grommets should be replaced along with the emblem. The grommets dry out and crack, which will make the emblem loose. A loose hood emblem has the possibility to allow the emblem to fly off while driving.

To remove the plastic grommets take a needle nose pliers and pull them out.  With the hood emblem and both grommets removed now is a good time to clean the hood.  It is likely dirt, sand and or salt was trapped under the old emblem from typical driving conditions.

Once the hood is cleaned, begin to install the new grommets by pushing them in place.  Now, take the new BMW hood emblem and align the tabs down on the new grommets. It should fit snuggly with no gaps between the emblem edges and the hood.  Installation is now complete.

Where can I learn more BMW tips?

Learn more BMW pro tips by clicking HERE

The late model BMW key fob's feature a nice colored roundel or emblem like the hood of your car.  If you use your BMW has a daily driver hitting that emblem for the lock button is a routine task throughout the day.  The more the button is pressed, the more yellow it becomes and eventually the stickiness will wear off and the emblem will completely remove itself from the key fob.

Luckily the simple solution is to just replace the emblem, you do not have to replace the entire key fob housing.  These OEM BMW key fob emblems are reasonably priced online for around $7 and will add vibrancy back to your BMW key.

Where to buy the emblem:

You can buy the part in our store via the link HERE

What OEM BMW part number emblem is for my key fob?

E12 / E21 / E23 / E24 / E28 / E3 / E30 / E31 / E52 / E53 / E34 / E36/ E46 / E38 / E39 / X5: 66122155753

The above emblem part number is 11mm in diameter.  If you are unsure if it will fit your key, simply measure it.

E60 / E61 / E63 / E64 / E82 / E88 / E90 / E91 / E92 / E93: 66122155754

How to remove old BMW key fob emblem:

If your key fob emblem isn't already missing, the removal process is incredibly simple.  Just pick at the edges with your finger nail until it peels off.  The emblem is only held on with a sticker like adhesive.  It is not permanently fastened down.

Once the emblem is removed you want to make sure the surface is perfectly clean.  We recommend using Goo-Gone to get the bulk sticky residue off and then go back with some rubbing alcohol to ensure no grease is left behind.  Use a lightly wet cotton swab.  MAKE SURE TO SPRAY THE WET THE COTTON SWAB LIGHTLY.  Do not spray the key fob directly with Goo-Gone or rubbing alcohol.  Hold the cotton swab aware from the key fob while applying the degreaser, this will ensure no liquid gets inside and ruins the electrical components.  Having a nice clean surface will ensure the new emblem sticks on properly and will last a long time.

How to apply the new BMW key fob emblem:

Now that you have a perfectly clean surface, peal off the new emblem from the paper backing.  Make sure not to touch the sticky side with your fingers.  The oil from your fingers will transfer to the backing and it will prevent a proper application.

A good technique is to take an exacto knife and apply the emblem to the end and then slowly lower it down on the key fob making sure it is centered.  Press down firmly and hold for a few seconds to make sure the new emblem is getting good contact.